Firstly, check the quality and compatibility of the brake pads. The brake pads should be specialized brake pads that comply with national standards and are compatible with the model of vehicle. There are certain differences in the brake pads of different car models, and selecting the appropriate brake pads can better utilize the performance of the braking system.
Secondly, confirm the degree of wear on the brake pads. Before installing new brake pads, it is necessary to confirm the degree of wear of the original brake pads. After the brake pads wear to a certain extent, it can lead to poor braking performance or even failure, so it is necessary to replace them in a timely manner.
Then, clean the installation position of the brake pads. The installation position of the brake pads is on the brake caliper, so it is necessary to clean the installation position of the brake caliper and brake pads to ensure that the brake pads can be installed correctly. When cleaning, car brake cleaner can be used to remove dirt and oil stains.
Next, lubricate the installation position of the brake pads. Before installing the brake pads, it is necessary to apply an appropriate amount of specialized brake pad lubricant to the contact surface between the brake pads and brake calipers. Lubricants can reduce friction, reduce abnormal noise, and provide stability in braking performance.
The order of installing brake pads is also important. Firstly, ensure that the vehicle comes to a steady stop and firmly apply the handbrake. Then, use a jack to lift the vehicle and support it with a support frame to ensure work safety. Next, remove the tire and you can see the brake pads and brake calipers.
Before installing brake pads, pay attention to the direction of the brake pads. Brake pads are usually labeled with front and rear lettering or arrow markings to ensure proper placement during installation. The manufacturer of car brake pads tells you to place the new brake pads in the brake calipers and determine the correct position of the brake pads based on the direction marked before and after.
After installing the brake pads, it is necessary to deflate the brake system. This can be achieved by pressing the brake pedal to the bottom and releasing the brake fluid plug. This can ensure that there is no air in the braking system, thereby improving the braking effect.
Finally, please make sure to test the working effect of the brake pads. After installing the brake pads, it is necessary to conduct a brake performance test to ensure that the braking effect is normal. You can choose to conduct low-speed testing in a safe location and pay attention to the condition of the brake pads to ensure there is no abnormal noise or vibration.